Home > Products

Plansifter

Feature: 1. High sifting capacity can be obtained by using different frame heights and intermediate frames(spacers). In this way, below and above sifting paths can be adjusted.
2. Effective sifting possibility at high capacities. It is possible to increase 22 % sifting area by using “G” type sifter boxes.
3. Each sifting cabin can accommodate up to 28 sifters.



  • Plansifter

Detailed

SCOPE OF USE

The square sifter offers many advantages for sifting processes at high capacities. It provides large sifting area in very limited space. The maximum sifting area can be obtained by using different types of boxes. It is used to sift the broken and floury products and classify different kinds of grains.

Working Principle

This machine consists of three main parts. Two sieve boxes and a central framework containing the drive unit. These parts are assembled by means of screws and transversal beams.
It is possible to separate the machine into three main parts for an easy make handling, shipping and hoisting to the installation floor.
- 2 pieces symmetrically designed sieve boxes
- 1 piece drive housing
- 2 pieces carrier arms
- 1 set of suspension group including suspension rods
The inner framework comprises all the parts dealing with the machine motion, in particular, the electrical motor, shaft and the counterweight mass. The whole shaft - counterweight unit is bedded by double ball bearings. The drive unit is easily accessible by removing the large side panels covering the central framework.

Features & Advantages

1. High sifting capacity can be obtained by using different frame heights and intermediate frames(spacers). In this way, below and above sifting paths can be adjusted.

2. Effective sifting possibility at high capacities. It is possible to increase 22 % sifting area by using “G” type sifter boxes.

3. Each sifting cabin can accommodate up to 28 sifters.

4. A special pressure-clamping device provides proper and tight closing of access doors, Two-way product flow.

 5. The sieves, square shaped and having an unchangeable structure, are made of first quality stable wood and are completely covered with laminated plastic (Formica).

 6. More sifting area is provided by changing the sieve frames position in right angle.

 7. Vertical and horizontal dividing possibility of sifting passages at any required level.

 8. Easy cleaning and maintenance possibility.

 9. Internally coated insulation panels to avoid condensation, if necessary.

10. A large variety of standard and special sieves enable the arrangement of many sifting in order to meet any flow sheet demand.

Message

Please write to us for Sales,support and other issues! Customer Service P: +86-371-67661988